ANS-043 AMSAT News Service Weekly Bulletins

ampr.bbs.satZur Gruppenliste
Betreff: ANS-043 AMSAT News Service Weekly Bulletins
Von: cx2sa@cx2sa
Gruppen: ampr.bbs.sat
Datum: 12. Feb 2017, 02:43:00
From: CX2SA@CX2SA.SAL.URY.SOAM
To  : SAT@AMSAT


AMSAT News Service Bulletin 043.01
From AMSAT HQ KENSINGTON, MD.
February 12, 2017
To All RADIO AMATEURS
BID: $ANS-043.01



SSTV From The ISS February 13-14

An MAI-75 Experiment SSTV event is planned to begin on Monday, Feb.
13 from 09:25-18:00 UTC and Tuesday, Feb. 14 from 11:25-16:30 UTC.
The downlink frequency is expected to be 145.800 MHz and the
transmission mode  is expected to be PD180. This opportunity should
cover most of the world during the operational period.

The MAI-75 experiment uses a notebook computer on the ISS Russian
Segment, which stores images that are then transmitted to Earth using
the ham radio, specifically the onboard Kenwood TM D710E transceiver.
Images received can be posted and viewed at https://ariss-
sstv.blogspot.com/

Please note that the event, and any ARISS event, is dependent on
other activities, schedules and crew responsibilities on the ISS and
are subject to change at any time.

While preparations are being finalized please check for new and the
most current information on the AMSAT.org and ARISS.org websites, the
AMSAT-BB@amsat.org, the ARISS facebook at Amateur Radio On The
International Space Station (ARISS) and ARISS twitter @ARISS_status
for the latest information on this event.

[ANS thanks ARISS for the above information]


---------------------------------------------------------------------


K5T Grid Expedition to DL88jx

Several satellite operators will make their way down to the
southernmost tip of Texas' "Big Bend" on Sunday, February 12, 2017.
Operating from within Big Bend National Park's Talley Campground via
amateur satellites, grid chasers will have a shot at the ellusive
DL88jx for a period of roughly 18 hours.

Listen for K5T on FM and SSB satellites starting roughly at 21:00 UTC
on February 12 through 15:00 UTC on February 13. ISS packet is
possible but not planned. You may occasionally catch K5T in grid
square DL89. Pass/schedule requests will not be honored on this trip.
Some HF operation may occur.

Paper QSL with SASE via W5PFG or LoTW with the callsign "K5T."

[ANS thanks Clayton W5PFG for the above Information]


---------------------------------------------------------------------


Great STEM Lesson Idea

Dave Ryan, EI4HT/M0GIW, has posted an excellent video of a project
he devised with his daught Erin.
Dave and his daughter downloaded the list of questions for the ARISS
QSO between Astronaut Shane Kimbrough and South Street School,
Danbury, Connecticut USA. He and Erin researched the questions and
made a list of projected answers for them. The contact was made with
ON4ISS, an ARISS telebridge station in Belgium, and Erin and Dave
were able to listen to the transmission live from from their QTH in
South Yorkshire, UK. Dave videotaped the QSO and posted it online at:
https://www.youtube.com/watch?v=MzQbyIH8Qwg

This is an excellent example of how to integrate Amateur Radio and
the the ISS without being directly part of an ARISS contact. The
examples can be used with any demo or within a planned classroom
setting. This is a great example of how to introduce a STEM related
activity and create an interest in the hobby at the same time.

[ANS thanks Dave EI4HT/M0GIW and Erin for the above information]


---------------------------------------------------------------------


Donations for AMSAT SA Kletskous CubeSat

Two companies, RS Components and Trax Interconnect, have made major
contributions to AMSAT SA's Kletskous CubeSat.  RS Components have
supplied components for the next generation Electronic Power Supply
system (EPS) and the controller board.  Trax Interconnect supplied
the PC Boards for the EPS, the controller board and the magnetic
stabilisation system.  Their support for amateur radio and amateur
radio satellites is much appreciated.

[ANS thanks the SARL weekly news in English 2017-2-4 for the above
 information]


---------------------------------------------------------------------


2017 Teachers Institute Schedule Announced

ARRL has announced the 2017 schedule for our Teachers Institute on
Wireless Technology. We want you to be among the first to receive
this information.  If you are an ARRL member you’ll see an article
about the Teachers Institute in the March issue of QST.  You will
also see an announcement in our next issue Radio Waves.

If you are a past participant of the Teachers Institute we hope that
you have found many ways to use the ideas, training and resources you
received and are interested in spreading the word to other teachers.
You may want to consider signing up for the advanced TI-2 on Remote
Sensing and Data Gathering.

You are probably in the best position to know where to circulate
information about this opportunity within your school district.  A
listing on your school or school district website?  A newsletter?   A
web page for science and technology teachers?  Word of mouth to
teachers in your circle? We’d like to get the word out to reach
teachers who can make use of this opportunity.

If you would like to receive copies of our printed brochures please
send your request and your mailing address to etp@arrl.org.

Here’s some copy you can use to announce the opportunity in your
school community:

Integrate STEM by Exploring Wireless Technology

ARRL, the national association for Amateur Radio, has just announced
the schedule for two sessions of its Introductory Teachers Institute
on Wireless Technology (TI-1) to be offered during the summer of
2017. The ARRL Teachers Institute is an expenses paid, intensive
professional development opportunity for educators who want to
receive training and resources to explore wireless technology in the
classroom.  Topics at the TI-1 Introduction to Wireless Technology,
include basic electronics, radio science, microcontroller programming
and basic robotics.  ARRL will also offer an advanced Teachers
Institute (TI-2) on Remote Sensing and Data Gathering. This linked
article from the March issue of ARRL’s journal, QST, includes the
schedule and description of offerings this summer.

Please visit the ARRL website at: www.arrl.org/ti for more details
and to download an application. Watch this video for an inside look
at the Teachers Institute!
Application deadline is May 1.

[ANS thanks Debra K1DMJ and the ARRL for the above information]


---------------------------------------------------------------------


University CubeSat Opportunity

The UK Space Agency is encouraging university students to take
advantage of a new opportunity to build and test their own CubeSats

The aim of the The Fly Your Satellite! program is to support
university student teams with educational CubeSats throughout the
assembly, integration, testing, and verification process. By
participating in the programme, students will implement standard
practices for spacecraft development; receive support from
experienced ESA specialists; attend tailored training courses; and
will be offered access to state-of-the-art test facilities.

ESA say only launch opportunities from the International Space
Station (ISS) are envisioned, and CubeSat teams applying need to
ensure that their mission complies with a deployment to orbit from
the ISS.

Further information at
http://tinyurl.com/ANS043-UnivCubesats

UK Space Agency
https://twitter.com/spacegovuk

[ANS thanks ESA via Southgate ARN for the above information]


---------------------------------------------------------------------


Nayif-1 CubeSat Launch Announced

AMSAT-UK and AMSAT-NL are delighted to now be able to confirm that
the Nayif-1 1U CubeSat, which has a full FUNcube payload, is now
scheduled for launch on an Indian PSLV launch vehicle at 03:58 UT on
February 15, 2017. The flight, C-37, will be carry a total of 104
satellites into orbit.

Nayif-1 has been developed by the Mohammed bin Rashid Space Centre
(MBRSC) and American University of Sharjah (AUS). The UAE’s first
Nanosatellite was developed by Emirati engineering students from AUS
under the supervision of a team of engineers and specialists from
MBRSC within the framework of a partnership between the two entities,
aiming to provide hands-on experience to engineering students on
satellite manufacturing.

The spacecraft includes a U/V linear transponder and telemetry
transmitter. It employs enhanced oscillator circuitry and includes an
active attitude determination and control system.

As with previous missions carrying FUNcube payloads, AMSAT-UK would
very much like to receive as many reports from stations around the
world, especially during the first few minutes and hours after
launch. We expect that the first signals may be heard in North
America during the mid evening hours (local time) on Feb 14.

There is a mission specific Telemetry Dashboard for this project and
this can be downloaded from:

http://download.funcube.org.uk/Nayif-1_Dashboard_1038_installer.msi

and, in a similar way to the FUNcube-1 Dashboard, this will be
capable of uploading the telemetry received
to a central Data Warehouse.

Guidance Notes for the installation of the Dashboard, integration
with a FUNcube Dongle and the Data Warehouse have been prepared for
the Nayif-1 mission. These can be downloaded
from:

http://tinyurl.com/ANS043-Nayif-1-Dashboard

A file to test that the Dashboard and Warehouse configuration are
working correctly can be downloaded from:
http://download.funcube.org.uk/nayif1_testfile.funcubebin

The operating frequencies for the spacecraft will be:

Telemetry
145.940 MHz using 1k2 BPSK to the FUNcube standard.

SSB/CW Transponder
Uplink on 435.045 – 435.015 MHz
Downlink on 145.960 – 145.990 MHz

Initial operations of the spacecraft will be in a low power “safe”
mode where only the telemetry transmitter is activated.

More details about the launch, exact deployment time and pre-launch
TLE’s will be made available as soon as they become available; in the
meantime we will really appreciate your support!

[ANS thanks AMSAT-UK for the above information]


---------------------------------------------------------------------


Nayif-1 UPDATE Pre-launch Keps and more details

The launch time for the Nayif-1 CubeSat has been confirmed as
03:58UTC on February 15th 2017 on the PSLV C37 vehicle and a set of
pre-launch TLEs have now been released:

NAYIF

1 17002U 17002A   17046.17824931 0.00000000  00000-0  00000-0 0  9993
2 17002  97.5521 107.5843 0004848 278.6481 296.8511 15.21991390    01

This file can also been downloaded from here
http://download.funcube.org.uk/nayif_tle.txt

We expect that the FUNcube transmitter on Nayif-1 will activate at
approximately 05:06UTC, but the exact timing is still to be
confirmed!  Initial transmissions will be in “safe” mode and will be
of the 1k2 BPSK telemetry only with approx 50mW of RF power. If the
predictions are correct, the spacecraft will be heading north over
Mexico and the western parts of the US and Canada.

During the Launch and Early Operation phase (LEOP) of the mission,
the Nayif-1 command team will be headquartered at the American
University of Sharjah Ground station in the United Arab Emirates.
They will obviously be especially keen to have all possible reports
of signal reception during this first orbit! To encourage everyone to
take part, there will be a small prize for the station that submits
the first data to the Nayif-1 Data Warehouse and perhaps an extra
reward if they manage to receive the very first frame transmitted by
the spacecraft! This should have the sequence number 5471 or 5472.

Details of the Nayif-1 frequencies, together with details of how to
the download the Dashboard can be found here

https://funcube.org.uk/2017/02/08/nayif-1-launch-date-now-confirmed/

The Data Warehouse is still under final development but a preview
can be seen here: http://data.amsat-uk.org/nayif1/index

Please note that if you are already a registered user of the FUNcube
Dashboard then you do not need to re-register. Your existing details
will transfer automatically to the new Dashboard when you run it for
the first time.

If you run the test file with the Nayif-1 Dashboard please do not
expect the Warehouse to show the data - it is from an earlier date
than that is already displayed. However the “packets uploaded” tab at
the bottom right corner of your Dashboard will show that the files
have uploaded OK, that all is well with your system and that it is
ready for action.

We are hoping that the actual launch will be webstreamed and details
of this will be made available as soon as possible.  The AMSAT-UK and
-NL team will also be using the #funcube IRC channel
on launch day and you will be very welcome to join them there. If
you do not have the Dashboard available then please submit your heard
reports here. A web client can be found at
http://irc.lc/freenode/funcube if you do not have an IRC client
installed.

[ANS thanks Graham G3VZV for the above information]


---------------------------------------------------------------------


UT1FG/MM QSL Procedure for this season

As you may know Yuri, UT1FG, prefers to do his own QSLs to the
extent possible.  He has asked me to help funnel QSL requests to him
while he is at sea so that he can process them and mail them from
ports as he travels. Yuri does not process qsl requests when he is
not on a ship.

The following procedure only applies to contacts made during this
season from the M/V Chestnut. Previous seasons will be handled by his
manager Eugene, UX0FY.  Eugene has all the logs for previous seasons
and can be contacted through his qrz.com email address.  Please
contact Eugene before sending anything in the mail to him and ask for
instructions on how to proceed.

You may prepare a logsheet of QSO's that Yuri can print, verify,
sign and mail from one of his destination ports.  An example of a
suitable logsheet can be found at papays.com/sat under the UT1FG/MM
QSL Instructions link at the top of the page.

Please use the following conventions when preparing the logsheet:

1.  List only one contact per grid.
2.  Only request confirmations of NEW Grids.
3.  Use Excel or a similar program to create the logsheet.
4.  Save the Logsheet to a .pdf  If your program cannot
    save to a .pdf, download a free program like Bullzip
    that will install a .pdf printer that you can print to
    and create a .pdf file.
5.  Each page should stand alone; there should be a
    place for Yuri's signature on each page.
6.  Incude your COMPLETE Mailing Address on each page.
7.  Name the logsheet file with this format:
    Yourcall_UT1FG_DateLastQSO
    for example:  DJ8MS_UT1FG_10Feb2017.pdf
8.  Email your file as an attachment to:
    k8yse at papays.com with the subject line the same
    as the .pdf file name:  DJ8MS_UT1FG_10Feb2017
10. Please be sure to follow the example on the
    website papays.com/sat/ut1fgqsl.html  Consistency
    will help Yuri process requests more efficiently.
11. If there are qso's on your list that are not in the
    log, Yuri will draw a line through them and initial.

I will send an acknowledgement email when I receive a request.  This
way you will know that Yuri will have your logsheet.

If Yuri tells me that he has mailed your logsheet, I will post that
information on the bulletin boards.

Yuri's time when nearing or in port is very limited. He has a lot of
responsibilities to carry out and large amounts of paper to process
along with requests from his Company.  He has more time when he is
sailing. Let that guide you when deciding when you email your
requests.  A good time to mail  your request is when Yuri is about 5
days from making port.  Follow him at marinetraffic.com (M/V Chestnut
- bulk Cargo).

This new procedure may be changed or stopped depending on how it
goes.  Hopefully this will work well and Yuri will find it acceptable.

We are very fortunate that Yuri operates from so many water grids
that otherwise would never be on the satellites.  His passion for
satellites is amazing. Have fun working him.

[ANS thanks John K8YSE for the above information]


---------------------------------------------------------------------


Live HAMTV Video Planned for ARISS Contact

The HAMTV experiment is planned transmit live video during the
ARISS contact with Collège André Malraux, Chatelaillon-Plage,
France on Mon 2017-02-13 14:00:35 UTC.

The HAMTV video downlink is on 2395 MHz (DVB-S,SR2000,fec 1/2,
PID video 256, PID audio 257, Mp eg2 codec). Audio will be on
70cm.

The video will be streamed on-line at:
https://hamtv.batc.tv/live/

Additional streaming from other ground stations will be at:
http://www.batc.tv/iss/

[ANS thanks Jean-Pierre, F6DZP and the HAMTV yahoogroups
e-mail list for the above information]


---------------------------------------------------------------------


ARISS News

+ A Successful contact was made between Space Exploration Educators
  Conference, Houston, Texas, and Astronaut Thomas Pesquet KG5FYG
  using Callsign NA1SS. The contact began Thu 2017-02-09 20:30:10 UTC
  and lasted about nine and a half minutes. Contact was Telebridge via
  K6DUE. ARISS Mentor was Frank KA3HDO.

+ A Successful contact was made between Palmetto Scholars Academy,
  North Charleston, SC, USA and Astronaut Shane Kimbrough KE5HOD using
  Callsign NA1SS. The contact began Fri 2017-02-10 17:59:18 UTC and
  lasted about nine and a half minutes. Contact was direct via K4PSA.
  ARISS Mentor was John K4SQC.

Upcoming ARISS Contact Schedule

Collège André Malraux, Chatelaillon-Plage, France, direct via F4KJT
The ISS callsign is presently scheduled to be FXØISS
The scheduled  astronaut is Thomas Pesquet KG5FYG
Contact is a go for: Mon 2017-02-13  14:00:35 UTC

3rd Junior High School, Komotini, Greece,  direct via SV7APQ
The ISS callsign is presently scheduled to be OR4ISS
The scheduled astronaut is Shane Kimbrough KE5HOD
Contact is a go for:  Fri 2017-02-17 08:58:11 UTC

[ANS thanks ARISS, Charlie AJ9N and David AA4KN for the above
 information]


---------------------------------------------------------------------


Satellite Shorts From All Over

+ The Smallsat Launcher War

  "Over the last decade or so the definition of what a ‘small
  satellite’ is has ballooned beyond the original cubesat design
  specification to satellites of 50 or 100 kg. Today a ‘smallsat’ is
  defined far more around the cost, and sometimes the technologies
  used, than the size and shape of the box that goes into orbit."

  Read the full story at:
  http://hackaday.com/2017/02/09/the-smallsat-launcher-war/

  [ANS thanks Hackaday.com for the above information and Bernhard
   VA6BMJ for bringing it to our attention]

+ NASA seeks partnerships with US companies to advance commercial
  space technologies

  NASA is seeking partnerships with U.S. companies focused on
  industry-developed space technologies that can advance the
  commercial space sector and benefit future NASA missions through
  the "Announcement of Collaborative Opportunity (ACO)" solicitation
  released by NASA's Space Technology Mission Directorate (STMD).

  Read complete story at:
  http://tinyurl.com/ANS043-NASAPartners

  [ANS thanks spacedaily.com for the above information]

+ Smallsat Builders Admit a Little Bigger Might Be a Little Better

  "What’s the perfect size for a small satellite? “The answer is 42
  kilograms,” said Martin Sweeting, Surrey Satellite Technology Ltd.
  founder and executive chairman, at the Small Satellite
  Symposium Feb. 7 and 8."

  See more at:
  http://tinyurl.com/ANS043-SmallSatBuilders

  [ANS thanks SpaceNews for the above information]

---------------------------------------------------------------------

Datum Thema#  Autor
12.02. o ANS-043 AMSAT News Service Weekly Bulletins1cx2sa

"News-Portal" auf dem HAM-Web-Servfer DB0ERF.