GB7CIP HF PACTOR INFO

ampr.bbs.pactorZur Gruppenliste
Betreff: GB7CIP HF PACTOR INFO
Von: g4apl@gb7cip
Gruppen: ampr.bbs.pactor
Datum: 01. May 2016, 07:26:00
From: G4APL@GB7CIP.#32.GBR.EURO
To  : PACTOR@WW


GB7CIP HF PACTOR FREQUENCIES

Hello and thanks for your interest in reading this.
The following describes GB7CIP System and frequencies.

GB7CIP Lin_XFBB server forward scripts automatically controlling
    SCS PTC-iiPro multimode controller
    Kenwood TS480-Sat (First operational November 2005)
       Scanning, band and frequency selection
       Switching between Homebrew multiple wire dipoles and 3ele HF Beam
       Rotator HAM VX/DCU1X and HF beam direction

Tones(4) 1400hz/1600hz USB for P1 P2 and P3 modes

Data Mode Allocation according to the 7MHz band plans

7MHz
7047.00 - 7050 00     500hz   Narrow band mode Automatically
Controlled Data Stations unattended
7050.00 - 7053.00     2.7KHz All Mode Automatically
Controlled Data Stations unattended

g4apl Paul (gb7cip HF PACTOR) Always looking for new HF AX25 Forwarding
partners.

He also likes having one to one HF PACTOR QSO's please arrange sked,
either via GB7CIP BBS FBB_Convers  C  (command) or via 14109.0 USB
centre frequency if he notices you have logged on. He will connect.

PACTOR AX25 LinFBB Forwarding sessions commence hourly at 28 minutes
past the hour.

HF Pactor Frequencies being scanned for connections
     Mark frequencies listed below are based on 1600hz 1400hz tones.
     If you use different tones you will need to minus your
     high tone from the USB Mark Frequency listed below to
     get the USB dial frequency.


HF Beam Headings in unattended mode - Times in GMT/UTC (approx)
VK/ZL Long Path 06:28-09:27
North America   15:28-06:27
Other Times  Towards mainland Europe, Far East and SP Oceania

40M 24 hours  20M 00:00-23:59 UTC 15M 06:00-23:59
##################
MARK QRG USB  DIAL QRG USB  Mode
   7048.00       7046.40      P1,P2
   7050.00       7048.40      P1,P2
   7051.50       7049.90      P1,P2,P3

14091.60      14090.00      P1,P2
14093.50      14091.90      P1,P2
14094.00      14092.40      P1,P2
14096.00      14094.40      P1,P2
14096.60      14095.00      P1,P2

14097.50      14095.90      P1,P2
14098.00      14096.40      P1,P2

14107.00      14105.40      P1,P2,P3
14107.50      14105.90      P1,P2,P3
14110.50      14108.90      P1,P2,P3

21098.00      21096.40      P1,P2
21098.80      21097.20      P1,P2
21096.60      21095.00      P1,P2

21112.00      21110.40      P1,P2,P3

28306.00      28304.40      P1,P2,P3
28130.00      28128.40      P1,P2

You can test the AX25 Mail path to GB7CIP.#32.GBR.EURO from your
home BBS. Using the PING route facility. By sending a message
in the following format to the GB7CIP PING Server..
SP PING@GB7CIP.#32.GBR.EURO
Subject: ping
Message: Body  nothing require
with a /EX on a new line to end message

Current active AX25 BBS forward partners are
DB0ZAV F3KT IK0MIL OK0PBR TA2BBS UA6ADV UT1HZM
N9LYA N0XR
When propagation behaves itself. I find this always interesting when
paths are open.

Reviewed 1.5.2016

Hope the above information was useful to you.


73 de Paul g4apl SysOp GB7CIP

--
g4apl@gb7cip.#32.gbr.euro  Mozilla's Thunderbird Client to access LinFBB

Datum Thema#  Autor
01.05. o GB7CIP HF PACTOR INFO1g4apl

"News-Portal" auf dem HAM-Web-Servfer DB0ERF.